Arc Welding-Definition, Working Diagram, Types, Temperature, Basic Equipment, Advantages, Application, Machine PDF

Are you looking for the Arc Welding? So today we will study the Definition, Working Diagram, Types, Temperature, Advantages, Disadvantages, Application, PDF. Here you will get the articles of Mechanical Engineering in brief with some key points and you will get to know an enormous amount of knowledge from It. So If you find this articles helpful, please let us know in the comment box, either if any correction required too, also let us know in the comment box.

Arc Welding:

Before going to Arc welding we first discuss welding So, Welding is defined as 

It is a fabrication process that joins materials, usually metals or thermoplastics, by causing coalescence.

This is often done by melting the workpiece and adding a filler material from a pool of molten material that cools to become a strong joint, but Sometimes the pressure is used in conjunction with heat, or by itself, to produce the weld.

This is in contrast with soldering and brazing which involves melting a lower-melting-point material between the workpiece to form a bond between them, without melting the workpiece.

Another definition is, The welding process is a material joining process which produces coalescence of Material by heating them to suitable temperature with or without application of pressure or by the application of pressure alone and with or without the use of filler materials.

Most useful books for Welding:


Arc welding is a welding process that is used to join metal to metal by using electricity to create enough heat to melt metal, and the melted metals when the cool result in a binding of the metals. Or

Arc welding is one of several fusion processes for joining metals. By applying intense heat, metal at the joint between two parts is melted and caused to intermix directly, or more commonly, with an intermediate molten filler metal. Upon cooling and solidification, a metallurgical bond is created. Since the joining is an intermixture of metals the final weldment potentially has the same strength properties as the metals of the parts.

A problem that arises in arc welding is contamination of the metal with elements in the atmosphere (O, H, N, etc). There can also be a problem with the surface that is not clean. 

Solution to this Includes,

  1. Gas shields: An inert gas is blown into the weld zone to drive away other atmospheric gases.
  2. Flux: A material that is added to clean the surface this may also give off a gas to drive away unwanted gases.

Let’s understand by an Arc welding circuit or Working diagram:

Arc welding working or circuit diagram:

An AC or DC power sources, fitted with whatever controls may be needed, is connected by work cable to the workpiece and by an electrode cable to electrode holder of some type, which makes electrical contact with the welding electrode.

Arc Welding

An arc is created across the gap when the energized circuit and the electrode tip touches the workpiece and is withdrawn yet still within close contact.

The arc produces a temperature of about 6500-degree centigrade at the tip.

This heat melts both the base metal and the electrode producing a pool of molten metal sometimes called a creator.

The creator solidifies behind the electrode as it is moved along the joint. This result is a fusion bond.

Understand in Details by Video (English):

Understand in Details by Video (Hindi):

Types of Arc Welding:

  1. Carbon Arc
  2. Flux cored Arc
  3. Gas Metal Arc
  4. Gas Tungsten Arc
  5. Plasma Arc
  6. Shielded Metal Arc
  7. Stub Arc
  8. Submerged Arc
  9. Atomic hydrogen  
  10. Electroslag Welding (ESW)
  11. Electrogas Welding (EGW)

Basic Equipment of Arc Welding:

Arc Welding Temperature
Arc Welding

From the Diagram Some equipment or parts used in the Arc welding process you can see and Some are not shown in the diagram which also I am going to explain. So,

  1. Welding Machine (Power Supply)
  2. Electrode Cable
  3. Electrode Holder
  4. Electrode
  5. Cable
  6. Hand Gloves
  7. Goggles
  8. Aprons
  9. Chipping Hammers
  10. Wire Brush

Welding Machine (Power Supply):

Electric or Power is supplying from Direct Board to Welding Machine to Electrode cable to Electrode Holder.

Electrode Cable:

The main function is to deliver the current to the electrode holder from the machine.

Electrode Holder:

The function is to hold the Electrode.


This electrode creates a spark when contacting the work.

Hand Gloves:

While performing welding operation safety comes first so for the hand we use here Hand gloves.


As the welding operation temperature is too high we can see the operation with the naked eye but after some time the eye gets damage. The eye can not sustain with high temperature therefor here we use Goggles.


Aprons are like clothes. We wear this for safety purposes.

Chipping Hammers:

This instrument is for holding the workpiece whenever required.

Wire Brush:

To remove unwanted material from the welded workpiece that is slag we use a wire brush.

Arc Welding Temperature / Working:

The Arc welding temperature ranges from minimum 3000-degree centigrade to up to 20000-degree centigrade.

So as the Diagram is shown above in which set up has been shown. Now supplying the power from machine to the electrodes by the electrode cable and holder.

So, the workpiece is mounted there than before electrode touches the workpiece we have to maintain 2 to 3 mm gap because when you directly touch it. It might get sticks and do vibrates. Here the several types of equipment used as above listed and explained.

Advantages, Disadvantages, and Application of Arc Welding:


  • The process gives high deposition rates.
  • Welding speed is high.
  • The Wire consumption is low.
  • The consumption of electrical energy is low, as a maximum of 97 % heat energy can be utilized.
  • Any length can be welded without any interruption.
  • High-quality Welds are achieved with no fusion defects, no porosity and slag inclusions.


The main disadvantages are that the High skilled operator required to perform an operation.

Arc is invisible, it can be controlled only by measuring arc voltage and current.

It can be used only in the down hand welding position.


The application of Arc welding in the various department like:

  • Industries Construction
  • Shipbuilding
  • Farm equipment
  • Lawn and Garden
  • Highway Equipment
  • Institutional Equipment
  • Railways Department

and There are various other places there also this arc welding is used.

If you having the Interest to buy a Welding Machine I have given the link that is affiliate link:

These Welding machines are the most rated star from the buyer:


Do you want to PDF? Join our WhatsApp or Telegram or facebook for Downloading the PDF.

Join our WhatsApp group: Engramritkumar Facebook

Join our telegram group:   Engramritkumar Telegram

Join our WhatsApp group: Engramritkumar WhatsApp

Today we have learned about Definition, Types, Working Diagram, Temperature, Advantages, Disadvantages, Application, PDF. If I have missed something, kindly inform me through commenting. If you like this article, don’t forget to share it on social networks. Subscribe our website for more informative articles. Thanks for reading it. Thank you.

2 thoughts on “Arc Welding-Definition, Working Diagram, Types, Temperature, Basic Equipment, Advantages, Application, Machine PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!