The article includes **fluid** and **Types of Fluid Flow.** Here we study **Steady and Unsteady, Uniform and Non-uniform, Laminar, and Turbulent, Compressible and In-compressible, Rotational and irrotational, One, Two and Three dimensional fluid Flow and PDF.** Here you will get the articles of Mechanical Engineering in brief with some key points and you will get to know an enormous amount of knowledge from It. So If you find this articles helpful, please let us know in the comment box, either if any correction required too, also let us know in the comment box.

## What is Fluid:

Before going to the **types of fluid** flow let have some overview regarding **fluid and its type** So,

A fluid is any substance that flows or deforms under applied shear stress. or

The substances which have the tendency to flow is also called as fluid.

**Types of Fluids:**

Basically, there are **5 different types of fluid** has been classified:

**Ideal fluid****Real fluid****Newtonian fluid****Non-Newtonian fluid, and****Ideal plastic fluid**

**1. Ideal Fluid:**

The fluid which cannot be compressed and have no viscosity falls in the category of an ideal fluid. Ideal fluid is not found in actual practice but

It is an imaginary fluid because all the fluid that exists in the environment have some viscosity. So, there is no ideal fluid in reality.

**2. Real Fluid:**

A fluid which is having some viscosity is called real fluid. Actually, all the fluids existing or present in the environment are called real fluids.

**3. Newtonian Fluid:**

The Fluid which obeys Newton’s law of viscosity (i.e the shear stress is directly proportional to the shear strain) then it is known as the Newtonian fluid.

**4. Non-Newtonian Fluid:**

The Fluid which does not obey Newton’s law of viscosity then it is called Non-Newtonian fluid.

**5. Ideal Plastic Fluid:**

A fluid having the value of shear stress more than the yield value and shear stress is proportional to the shear strain (velocity gradient) is known as ideal plastic fluid.

Even, I have covered in very details the **Properties of fluid.**

**Density or Mass Density****Weight Density or Specific Weight:****Specific Volume and****Specific Gravity**

Continue readings of **Properties of Fluids**.

**Types of fluid flow:**

### 1. Steady and Unsteady flows:

The steady flow is defined as that type of flow in which the fluid characteristics like velocity, density, pressure, etc at a point do not change with the time.

Whereas the Unsteady flow is defined as,

The unsteady flow is defined as that type of flow in which the fluid characteristics like velocity, density, pressure, etc at a point change respected to time.

### 2. Uniform and Non-uniform fluid flow:

This uniform fluid flow is defined as the type of flow in which the velocity at any given time does not change with respect to space (i.e length of direction of the flow).

Whereas the Non-uniform flow is defined as,

This non-uniform fluid flow is defined as the type of flow in which the velocity at any given time changes with respect to space (i.e length of a direction of the flow).

### 3. Laminar, and Turbulent fluid flow:

This laminar fluid flow is defined as that type of flow in which the fluid particles move along well-defined paths or streamline and all the streamlines are straight and parallel.

Thus the particles move in laminas or layers gliding smoothly over the adjacent layer. This type of fluid is also called as streamline flow or viscous flow.

This Turbulent fluid flow is defined as that type of flow in which the fluid particles move in a zig-zag way, the eddies formation takes place which is responsible for high energy loss.

For pipe flow, The type of flow is determined by a non-dimensional number [(VD) / (ν) nuo] called the Reynolds number.

Where,

- D = Diameter of pipe
- V = Mean velocity flow in a pipe
- ν = Kinematic viscosity of the fluid.

*If the Reynold Number is less than 2000, the flow is called Laminar flow.*

*Reynold Number is more than 4000, the flow is called Turbulent flow.*

*If the Reynold Number is lies between 2000-4000, the flow may be laminar or turbulent.*

**Preparing for Competitive Exam? If Yes, then must go for this book:**

** The most valuable and trusted Mechanical Objective book by R S Khurmi 5000+ Objective.**

### 4. Compressible and Incompressible fluid flow:

Compressible fluid flow is defined as the flow in which the density is not constant which means the density of the fluid changes from point to point.

**ρ≠constant**

Whereas,

Compressible fluid flow is defined as the flow in which the density is constant which means the density of the fluid does not change from point to point.

**ρ=constant**

Gases are compressible fluid flow but whereas the liquid is incompressible fluid flow.

### 5. Rotational and irrotational Fluid flow:

The rotational fluid flow is defined as the type of fluid flow in which the fluid particles while flowing along streamline and also rotate about there own axis.

Whereas,

The Ir-rotational fluid flow is defined as the type of fluid flow in which the fluid particles while flowing along streamline and do not rotate about there own axis.

### 6. One, Two and Three-dimensional fluid Flow:

One dimensional flow is that type of flow in which the flow parameter such as velocity is a function of time and one space co-ordinate only, say x.

**u=f(x), v=0 and w=0**

Where u,v and w are velocity component in x,y and z directions respectively.

Two-dimensional fluid flow is that type of flow in which velocity is a function of time and two rectangular space co-ordinate say x,y.

**u= f _{1}(x,y,), v= f_{2}(x,y,) and w= 0.**

Three-dimensional fluid flow is that type of flow in which velocity is a function of time and three mutually perpendicular directions. The function of 3 space coordinates (x,y,z).

**u= f _{1}(x,y,z), v= f_{2}(x,y,z) and w= f_{3}(x,y,z).**

**Types of Fluid Flow PDF:**

Download PDF from Facebook or telegram group.

**Join our WhatsApp group: Engramritkumar Facebook**

**Connect telegram group: Engramritkumar Telegram**

**Join our WhatsApp group: Engramritkumar WhatsApp**

**Other Top Trending Post in details:**

Today we have learned about **Steady and Unsteady, Uniform and Non-uniform, Laminar, and Turbulent, Compressible and Incompressible, Rotational and irrotational, One, Two and Three dimensional fluid Flow and PDF.** If I have missed something, kindly inform me through commenting. If you **like** this article, don’t forget to **share it** on **social networks. Subscribe our website** for more informative articles. Thanks for reading it. **Thank you.**